Mitutoyo 550-223-10 ABSOLUTE Nib Style Jaw Digital Caliper, LCD, Battery Powered, 0-18"/0-450mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution top price


you want to buy Mitutoyo 550-223-10 ABSOLUTE Nib Style Jaw Digital Caliper, LCD, Battery Powered, 0-18"/0-450mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 550-223-10 ABSOLUTE Nib Style Jaw Digital Caliper, LCD, Battery Powered, 0-18"/0-450mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 550-223-10 ABSOLUTE Nib Style Jaw Digital Caliper, LCD, Battery Powered, 0-18"/0-450mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $906.00
Price: $799.45 & this item ships for FREE with Super Saver Shipping. Details
You Save: $106.55 (12%)


  • The Mitutoyo 550-223-10 ABSOLUTE 550 series digital caliper is especially adapted for precise inside and outside diameter measurements. Its nib-style jaws are suitable for grasping round and spherical-shaped instruments to gauge and provide clear readings up to the maximum level of accuracy. In making inside diameter (ID) measurements, the round outside surface of each ID nib fits closely against curve of the inside surface being measured. Made of durable hardened stainless steel to shield its components, it can be used anywhere in the workshop. Using Mitutoyo’s ABSOLUTE linear encoder technology, it allows you to “set and forget” the origin and measure in awkward or difficult locations.
  • This heavy-duty digital caliper has large 0.365-inch/9.7-mm LCD characters and easy-to-reach function control buttons, such as Inch/Metric to convert from inch to metric measurements, Origin to set and retain the original measuring point, On/Off to automatically shut off the caliper after 30 minutes, and Zero/ABS (Absolute Scale) to zero-set the LCD display. Its LCD readout can indicate measurements as small as 0.0005"/0.01 mm, the minimum measurement for ID resolution.
  • Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper has an LCD which increases reading reliability. The 550-223-10’s LCD also reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point you set, even after shutoff. With the caliper on again, you can immediately start measuring, without zero resetting or worrying about overspeed errors. You can "zero out" the LCD before making and comparing incremental measurements without having to subtract the first measurement from the second.
  • The 550-223-10 has the ABSOLUTE electrostatic capacitance linear encoder. It weighs 1,110g and measures outer diameter (OD) and inner diameter (ID). Its nib-style jaws have round measuring faces with a nib length of 18 mm, a jaw depth of 100 mm. Main scale length is 632 mm and beam width is 25 mm. Range is 0 (0.5") - 18"/0 (20) - 450 mm, LCD resolution is 0.0005"/0.01 mm, repeatability is 0.0005”/0.01 mm, and accuracy is rated at + or - 0.002". Also included are origin-setting, zero-setting, inch-to-metric conversion, and on/off automatic shutoff function buttons. A Digital LCD Data Reading Hold function is available with the optional Data Hold Unit (959143), sold separately. An alarm alerts the user to low voltage and counting value composition errors. A thumb screw locks the scale’s position. Response speed is unlimited. The caliper has Statistical Process Control (SPC) data output capability for manufacturing quality control. It outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (959149 or 959150, depending on cable length). It draws 1/4 the battery power when switched on and about 1/8 the battery power when switched off compared to other digital calipers. The SR44 silver oxide cell battery (938882) lasts for approximately 3.5 years of normal use and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differential between two objects. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 550-223-10 caliper
  • Two SR44 silver oxide cell batteries
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm