Mitutoyo 573-702 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-8"/0-200mm Range, +/-0.001" Accuracy, SPC, 0.0005"/0.01mm Resolution reviews


you want to buy Mitutoyo 573-702 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-8"/0-200mm Range, +/-0.001" Accuracy, SPC, 0.0005"/0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-702 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-8"/0-200mm Range, +/-0.001" Accuracy, SPC, 0.0005"/0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 573-702 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-8"/0-200mm Range, +/-0.001" Accuracy, SPC, 0.0005"/0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $504.00
Price: $451.46 & this item ships for FREE with Super Saver Shipping. Details
You Save: $52.54 (10%)


  • The Mitutoyo 573-702 Digimatic digital offset caliper has a sliding main scale jaw for measurement of step sections and uses Mitutoyo’s ABSOLUTE linear encoder technology. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Metric/Inch, Power On/Off, and Data Output, and uses inch and metric measuring systems.
  • The 573-702 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 198 g and has a depth bar. Range is 0 - 8"/0 - 200 mm, resolution is 0.0005"/0.01 mm, and accuracy is rated + or - 0.001". Also included are Origin-setting, Zero-setting, Inch/Metric, and Power On/Off automatic shutoff function buttons. This caliper meets standard IP67 for protection against dust and temporary submersion in water. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (part 05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (part 938882) lasts approximately 3.5 years with normal use.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-702 digital caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 573-708 ABSOLUTE Offset Centerline Jaw Digital Caliper, LCD, Battery Powered, 0.4-12"/10-300mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution best seller


you want to buy Mitutoyo 573-708 ABSOLUTE Offset Centerline Jaw Digital Caliper, LCD, Battery Powered, 0.4-12"/10-300mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-708 ABSOLUTE Offset Centerline Jaw Digital Caliper, LCD, Battery Powered, 0.4-12"/10-300mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 573-708 ABSOLUTE Offset Centerline Jaw Digital Caliper, LCD, Battery Powered, 0.4-12"/10-300mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $758.00
Price: $755.43 & this item ships for FREE with Super Saver Shipping. Details
You Save: $2.57


  • Mitutoyo IP67 Offset Caliper, Range: 0.4-12"/10-300 mm, Resolution: .0005”/0.01mm, Material: Stainless Steel, SPC Output: Yes, Remarks: IP67 Rated

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-402 Absolute LCD Digimatic Indicator ID-C, Standard Type, #4-48 UNF Thread, 0.375" Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.0005"/0.01mm Graduation, +/-0.001" Accuracy best offers


you want to buy Mitutoyo 543-402 Absolute LCD Digimatic Indicator ID-C, Standard Type, #4-48 UNF Thread, 0.375" Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.0005"/0.01mm Graduation, +/-0.001" Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-402 Absolute LCD Digimatic Indicator ID-C, Standard Type, #4-48 UNF Thread, 0.375" Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.0005"/0.01mm Graduation, +/-0.001" Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-402 Absolute LCD Digimatic Indicator ID-C, Standard Type, #4-48 UNF Thread, 0.375" Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.0005"/0.01mm Graduation, +/-0.001" Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $293.00
Price: $289.09 & this item ships for FREE with Super Saver Shipping. Details
You Save: $3.91 (1%)


  • Mitutoyo IDC Digimatic Indicator, Resolution: .0005"/0.01mm Range: .500", Stem diameter: 3/8", Back: Lug back, Output: Yes, Face rotation: 330°, Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching, Power On/Off, Data out

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 551-224-10 ABSOLUTE Nib and Standard Style Jaw Digital Caliper, LCD, Battery Powered, 0-20"/0-500mm Range, +/-0.0025" Accuracy, SPC, 0.0005"/0.01mm Resolution top price


you want to buy Mitutoyo 551-224-10 ABSOLUTE Nib and Standard Style Jaw Digital Caliper, LCD, Battery Powered, 0-20"/0-500mm Range, +/-0.0025" Accuracy, SPC, 0.0005"/0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 551-224-10 ABSOLUTE Nib and Standard Style Jaw Digital Caliper, LCD, Battery Powered, 0-20"/0-500mm Range, +/-0.0025" Accuracy, SPC, 0.0005"/0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 551-224-10 ABSOLUTE Nib and Standard Style Jaw Digital Caliper, LCD, Battery Powered, 0-20"/0-500mm Range, +/-0.0025" Accuracy, SPC, 0.0005"/0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $1,160.00
Price: $1,040.85 & this item ships for FREE with Super Saver Shipping. Details
You Save: $119.15 (10%)


  • The Mitutoyo 551-224-10 ABSOLUTE Digimatic digital caliper has both standard and nib style jaws and uses Mitutoyo’s ABSOLUTE linear encoder technology. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Inch/Metric, and Data Output, and uses both inch and metric measuring systems. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper’s LCD increases reading reliability.
  • The 551-224-10 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 1,060 g and has standard upper jaws and nib style lower jaws. Range is 0 (0.5”) - 18"/0 (20) - 450 mm, resolution is 0.0005"/0.01 mm, and accuracy is rated + or - 0.0025". Also included are Origin-setting, Zero-setting, Inch/Metric, and Data Output function buttons. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (938882) lasts approximately 3.5 years with normal use and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 551-224-10 caliper
  • One SR44 silver oxide cell battery
  • Wooden case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-263 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, #4-48 UNF Thread, 0.375" Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.0001"/0.001mm Graduation, +/-0.003048mm Accuracy best seller


you want to buy Mitutoyo 543-263 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, #4-48 UNF Thread, 0.375" Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.0001"/0.001mm Graduation, +/-0.003048mm Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-263 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, #4-48 UNF Thread, 0.375" Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.0001"/0.001mm Graduation, +/-0.003048mm Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-263 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, #4-48 UNF Thread, 0.375" Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.0001"/0.001mm Graduation, +/-0.003048mm Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $475.00
Price: $435.26 & this item ships for FREE with Super Saver Shipping. Details
You Save: $39.74 (8%)


  • The Mitutoyo 543-263 IDC Digimatic indicator gauge measures to 0.5” (12.77 mm), has an LCD digital readout with resolution to 0.0001” (0.001 mm), and data output to transmit results to a Mitutoyo miniprocessor or computer for statistical process control (SPC). The gauge is accurate to + or - 0.00012” (0.003 mm), and supports a measuring force of 1.5 newtons or less. The unit runs on, and includes, one SR44 battery.
  • This indicator gauge has an electronic microprocessor that samples at 50 times per second, and can preset a reference height at any position, set a temporary zero position and return to a true zero reading, switch counting direction, set upper and lower tolerance bounds, and automatically store and hold display of maximum, minimum, and runout (maximum minus minimum) readings. The LCD display also indicates in- or out-of-tolerance (GO/±NG) measurements when bounds are set. The LCD digital readout can display measurements in inches or metric units. The output port transmits results to a Mitutoyo miniprocessor or computer through an interface cable for SPC (sold separately). An electrostatic capacitance linear encoder helps prevent overspeed errors which help ensure repeatable, precise measurement. A lug on the back of the gauge supports mounting onto a gauge stand. The gauge’s stem diameter is 3/8”, with threads conforming to #4-48 UNF of the Unified Thread Standard (UTS). The gauge conforms to the American National Standards Institute/American Gage Design (ANSI/AGD) standard.
  • Indicator gauges, also called gages or dial indicators, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as the amount of surface distortion, or runout, on a round or cylindrical workpiece. They have two styles: digital indicator gauges and dial indicator gauges. Digital indicator gauges use an electronic sensor and display measurement through an LCD or other digital display. Dial indicator gauges measure through a spring-loaded plunger driven into its shaft. The pointer on the dial display marks the degree the plunger is depressed, while an additional turn counter may track the number of times the pointer has spun around the dial. For all types of indicator gauges, runout is typically measured when the tip of the plunger (the point) is held perpendicular to the rotating workpiece. Indicator gauges are typically used in manufacturing, machining, and mechanical engineering.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 543-263, IDC Digimatic indicator gauge
  • One SR44 battery

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-552A Absolute LCD Digimatic Indicator ID-F, with Back-Lit LCD, #4-48 UNF Thread, 0.375" Stem Dia., 0-1"/0-25.4mm Range, +/-0.00012" Accuracy reviews


you want to buy Mitutoyo 543-552A Absolute LCD Digimatic Indicator ID-F, with Back-Lit LCD, #4-48 UNF Thread, 0.375" Stem Dia., 0-1"/0-25.4mm Range, +/-0.00012" Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-552A Absolute LCD Digimatic Indicator ID-F, with Back-Lit LCD, #4-48 UNF Thread, 0.375" Stem Dia., 0-1"/0-25.4mm Range, +/-0.00012" Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-552A Absolute LCD Digimatic Indicator ID-F, with Back-Lit LCD, #4-48 UNF Thread, 0.375" Stem Dia., 0-1"/0-25.4mm Range, +/-0.00012" Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $632.00
Price: $581.28 & this item ships for FREE with Super Saver Shipping. Details
You Save: $50.72 (8%)


  • The Mitutoyo 543-552A ID-F ABSOLUTE Digimatic indicator gauge measures to 1” (25.4mm), has a backlit LCD digital readout with resolution of 0.00005/.0001/.0005/.001”, or 0.001/0.01mm, and Go/+ or - No-go (NG) judgment with red and green backlighting. An indicator is an instrument that measures short, linear distances in mechanical engineering, machining, and manufacturing applications.
  • This indicator gauge has Go/+ or - No-go (NG) judgment when upper and lower tolerances are set. Red backlighting indicates when judgment is out of tolerance, and green backlighting indicates when judgment is in tolerance. A backlit LCD digital readout displays measurements in inches or metric units. Maximum, minimum, or runout value can be displayed during measurement. An adjustable analog bar indicator is integrated to handle lower and upper limit approaching, and zero approaching for ease of operation. An electrostatic capacitance linear encoder helps prevent overspeed errors, which in turn helps ensure repeatable, precise measurement. Once the measurement reference point has been preset, it will not be lost when the power is turned on. Statistical process control (SPC) output transmits results to a Mitutoyo miniprocessor or computer through an interface cable (sold separately).
  • Specifications
  • Range 0 to 1.0” (0 to 25.4mm)
  • Resolution 0.00005/.0001/.0005/.001”/, or 0.001/0.01mm
  • Accuracy + or - .00012”, .003mm
  • Quantizing error 1 count
  • Measuring force 0 to 1.8 newtons (N) or less
  • Contact point .16” (D) steel ball (4-48UNF) 900032
  • Display Backlit LCD digital in inches or metric units.
  • Indicators Green or red backlighting displays GO/+ or -NG judgment indicators
  • Functions Origin-set/preset, zero-set, GO/+ or - NG judgment, Max/min value hold, runout measurement, resolution switching, counting direction switching, power on/off, data output, inch/mm conversion
  • Alarms Low-voltage, counting value composition error, over-flow error, tolerance setting error
  • Dimensions 167.3 x 66 x 43.3cm/6.59 x 2.6 x 1.70 inches (H x W x D)
  • Weight 0.53lb.
  • Power source 9V DC battery, via 120V AC adapter (both included)
  •  
  • H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
  • Indicator gauges, also called gages or dial indicators, are precision instruments that measure short linear distances. They are commonly used for detecting deviations from tolerance limits, such as the amount of surface distortion, or runout, on a round or cylindrical workpiece. They have two styles: digital indicator gauges and dial indicator gauges. Digital indicator gauges use an electronic sensor and display measurement through an LCD or other digital display. Dial indicator gauges measure through a spring-loaded plunger driven into the shaft. The pointer on the dial display marks the degree the plunger is depressed, while an additional turn counter may track the number of times the pointer has spun around the dial. For all types of indicator gauges, runout is typically measured when the tip of the plunger (the point) is held perpendicular to the rotating workpiece. Indicator gauges are typically used in manufacturing, machining, and mechanical engineering.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 543-552A ID-F Digimatic indicator gauge
  • One 9V DC battery
  • One AC adapter

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-576 Absolute LCD Digimatic Indicator ID-N, IP66, #4-48 UNF Thread, 0.375" Stem Dia., 0-0.5"/0-12.7mm Range, 0.00012"/0.003mm Graduation, +/-0.00012" Accuracy reviews


you want to buy Mitutoyo 543-576 Absolute LCD Digimatic Indicator ID-N, IP66, #4-48 UNF Thread, 0.375" Stem Dia., 0-0.5"/0-12.7mm Range, 0.00012"/0.003mm Graduation, +/-0.00012" Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-576 Absolute LCD Digimatic Indicator ID-N, IP66, #4-48 UNF Thread, 0.375" Stem Dia., 0-0.5"/0-12.7mm Range, 0.00012"/0.003mm Graduation, +/-0.00012" Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-576 Absolute LCD Digimatic Indicator ID-N, IP66, #4-48 UNF Thread, 0.375" Stem Dia., 0-0.5"/0-12.7mm Range, 0.00012"/0.003mm Graduation, +/-0.00012" Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $474.00
Price: $417.21 & this item ships for FREE with Super Saver Shipping. Details
You Save: $56.79 (12%)


  • Built-in tolerance judgment function. Waterproof data output connector. Built-in hold/preset function. Stem diameter 3/8" 4-48 UNF (Unified Fine Thread) Thread size. Length standard: Absolute electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Battery: SR44 (1 pc.), 938882. Battery life: Approx. 7000 hours under normal use. Dust/Water protection level: IP66. Measuring Force: 2.0N or less

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

sonynex 724camera
Continue Reading

Mitutoyo 573-291-20 ABSOLUTE Low Force Digital Caliper, LCD, Battery Powered, 0-7"/0-180mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution top price


you want to buy Mitutoyo 573-291-20 ABSOLUTE Low Force Digital Caliper, LCD, Battery Powered, 0-7"/0-180mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-291-20 ABSOLUTE Low Force Digital Caliper, LCD, Battery Powered, 0-7"/0-180mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 573-291-20 ABSOLUTE Low Force Digital Caliper, LCD, Battery Powered, 0-7"/0-180mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $996.00
Price: $906.10 & this item ships for FREE with Super Saver Shipping. Details
You Save: $89.90 (9%)


  • The Mitutoyo 573-291-10 ABSOLUTE low force digital caliper uses low measuring force to measure pliable materials such as plastic and rubber. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, Inch/Metric, and Data Output, and uses both inch and metric measuring systems.
  • The 573-291-10 has the ABSOLUTE electrostatic capacitance linear encoder. It weighs 253 g. Main scale length is 314 mm, jaw depth is 40 mm, and beam width is 16 mm. Range is 0 - 7"/0 - 180 mm, resolution is 0.0005"/0.01 mm, and accuracy is rated at + or - 0.002". Measuring force is 0.49N to 0.98N. Also included are origin-setting, zero-setting, inch-to-metric conversion, data output, and power on/off automatic shutoff function buttons. A Digital LCD Data Reading Hold function is available with the optional data hold unit (part 959143), sold separately. An alarm alerts the user to low voltage and counting value composition errors. A thumbwheel permits fast and easy measuring and a thumb screw locks the scale’s position. Response speed is unlimited. The caliper has Statistical Process Control (SPC) data output capability for manufacturing quality control. It outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (959149 or 959150, depending on cable length). The SR44 silver oxide cell battery (part 938882) lasts for approximately 3.5 years of normal use, and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differential between two objects. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-291-10 digital caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

sonynex 724camera
Continue Reading

Mitutoyo 573-752 ABSOLUTE Neck Digital Caliper, LCD, Battery Powered, 0-6"/0-150mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution, Pointed Jaw special offers


you want to buy Mitutoyo 573-752 ABSOLUTE Neck Digital Caliper, LCD, Battery Powered, 0-6"/0-150mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution, Pointed Jaw,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-752 ABSOLUTE Neck Digital Caliper, LCD, Battery Powered, 0-6"/0-150mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution, Pointed Jaw in amazon.You can choose to buy a product and Mitutoyo 573-752 ABSOLUTE Neck Digital Caliper, LCD, Battery Powered, 0-6"/0-150mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution, Pointed Jaw at the Best Price Online with Secure Transaction in amazon...
List Price: $759.00
Price: $681.98 & this item ships for FREE with Super Saver Shipping. Details
You Save: $77.02 (10%)


  • The Mitutoyo 573-752 Digimatic neck digital caliper uses Mitutoyo’s ABSOLUTE linear encoder technology and has point type jaws for measuring wall thickness inside bores and recesses. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Inch/Metric, Power On/Off, and Data Output, and uses both inch and metric measuring systems.
  • The 573-752 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 157 g. Range is 0 - 6"/0 - 150 mm, resolution is 0.0005"/0.01 mm, and accuracy is rated + or - 0.0015". Also included are Origin-setting, Zero-setting, Inch/Metric, and Power On/Off automatic shutoff function buttons. This caliper is Ingress Protection 67 (IP67)-certified for protection against dust and temporary submersion in water. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (part 05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (part 938882) lasts approximately 3.5 years with normal use.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-752 digital caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 575-122 Absolute LCD Digimatic Indicator ID-U, M2.5X0.45 Thread, 0.3125" Stem Dia., Flat Back, 0-1"/0-25.4mm Range, 0.0005"/0.01mm Graduation, +/-0.0008mm Accuracy best offers


you want to buy Mitutoyo 575-122 Absolute LCD Digimatic Indicator ID-U, M2.5X0.45 Thread, 0.3125" Stem Dia., Flat Back, 0-1"/0-25.4mm Range, 0.0005"/0.01mm Graduation, +/-0.0008mm Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 575-122 Absolute LCD Digimatic Indicator ID-U, M2.5X0.45 Thread, 0.3125" Stem Dia., Flat Back, 0-1"/0-25.4mm Range, 0.0005"/0.01mm Graduation, +/-0.0008mm Accuracy in amazon.You can choose to buy a product and Mitutoyo 575-122 Absolute LCD Digimatic Indicator ID-U, M2.5X0.45 Thread, 0.3125" Stem Dia., Flat Back, 0-1"/0-25.4mm Range, 0.0005"/0.01mm Graduation, +/-0.0008mm Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $184.00
Price: $177.45 & this item ships for FREE with Super Saver Shipping. Details
You Save: $6.55 (4%)


  • Stem diameter 3/8" 4-48 UNF (Unified Fine Thread) Thread size. Length standard: ABSOLUTE electrostatic capacitance type linear encoder, Max. response speed: Unlimited, Battery: SR44 (1 pc.), 938882, Battery life: Approx. 20,000 hours under normal use, Dust/Water protection level: IP42, Origin-set, Zeroset, Counting direction switching, Power ON/OFF, Data output, inch/mm conversion (on inch/metric models only), Alarm: Low voltage, Counting value composition error, Over-flow error, Measuring force: 1.8N or less.

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-471B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-1"/0-25.4mm Range, 0.00005"/0.001mm Graduation, +/-0.0001" Accuracy special discount


you want to buy Mitutoyo 543-471B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-1"/0-25.4mm Range, 0.00005"/0.001mm Graduation, +/-0.0001" Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-471B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-1"/0-25.4mm Range, 0.00005"/0.001mm Graduation, +/-0.0001" Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-471B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-1"/0-25.4mm Range, 0.00005"/0.001mm Graduation, +/-0.0001" Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $538.00
Price: $496.26 & this item ships for FREE with Super Saver Shipping. Details
You Save: $41.74 (8%)


  • Display: LCD, length standard: absolute electrostatic capacitance type linear encoder, max. Response speed: unlimited, measuring force: refer to the list of specifications, battery: sr44 (1 pc.), 938882, battery life: approx. 5,000 Hours under normal use, dust/water protection level: ip42 or ip53 (dust-proof type) origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only).

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 573-742 ABSOLUTE Inside Caliper Digital Caliper, LCD, Battery Powered, 0.4-8"/10-200mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution, Knife-Edge Type, Measurable Min. Hole Dia. 4" special discount


you want to buy Mitutoyo 573-742 ABSOLUTE Inside Caliper Digital Caliper, LCD, Battery Powered, 0.4-8"/10-200mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution, Knife-Edge Type, Measurable Min. Hole Dia. 4",yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-742 ABSOLUTE Inside Caliper Digital Caliper, LCD, Battery Powered, 0.4-8"/10-200mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution, Knife-Edge Type, Measurable Min. Hole Dia. 4" in amazon.You can choose to buy a product and Mitutoyo 573-742 ABSOLUTE Inside Caliper Digital Caliper, LCD, Battery Powered, 0.4-8"/10-200mm Range, +/-0.002" Accuracy, SPC, 0.0005"/0.01mm Resolution, Knife-Edge Type, Measurable Min. Hole Dia. 4" at the Best Price Online with Secure Transaction in amazon...
List Price: $862.00
Price: $785.31 & this item ships for FREE with Super Saver Shipping. Details
You Save: $76.69 (9%)


  • The Mitutoyo 573-742 ABSOLUTE digital inside caliper has point type jaws for hard-to-reach inside measurements and uses Mitutoyo’s ABSOLUTE linear encoder technology. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, and Data Output, and uses the metric measuring system.
  • The 573-742 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 227 g. Range is 1.5 - 10 mm/0.06" - 0.4", resolution is 0.01mm/.0005", and accuracy is rated + or - 0.03 mm. Also included are origin-setting, zero-setting, and on/off automatic shutoff function buttons. This caliper is Ingress Protection 67 (IP67)-certified for protection against dust and temporary submersion in water. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (part 05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (part 938882) lasts approximately 3.5 years with normal use.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-742 digital caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-264B Absolute LCD Digimatic Indicator ID-C, for Bore Gage Application, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-12.7mm Range, 0.001mm Graduation, +/-0.003mm Accuracy top price


you want to buy Mitutoyo 543-264B Absolute LCD Digimatic Indicator ID-C, for Bore Gage Application, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-12.7mm Range, 0.001mm Graduation, +/-0.003mm Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-264B Absolute LCD Digimatic Indicator ID-C, for Bore Gage Application, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-12.7mm Range, 0.001mm Graduation, +/-0.003mm Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-264B Absolute LCD Digimatic Indicator ID-C, for Bore Gage Application, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-12.7mm Range, 0.001mm Graduation, +/-0.003mm Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $475.00
Price: $433.18 & this item ships for FREE with Super Saver Shipping. Details
You Save: $41.82 (9%)


  • Length standard: ABSOLUTE electrostatic capacitance type linear encoder, Max. response speed: Unlimited, Measuring force: 1.5N or less, Battery: SR44 (2 pieces.), 938882, Battery life: Approx. 2000 hours under normal use, Dust/Water protection level: IP42, This ID-C series digimatic indicators are exclusively designed for id measurement. Origin-set/preset, zeroset, GO/+/-NG judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only) alarm: low voltage, counting value composition error, over-flow error, tolerance limit setting error.

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 573-608 ABSOLUTE Offset Centerline Jaw Digital Caliper, LCD, Battery Powered, 10-300mm Range, +/-0.04mm Accuracy, SPC, 0.01mm Resolution top deals


you want to buy Mitutoyo 573-608 ABSOLUTE Offset Centerline Jaw Digital Caliper, LCD, Battery Powered, 10-300mm Range, +/-0.04mm Accuracy, SPC, 0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-608 ABSOLUTE Offset Centerline Jaw Digital Caliper, LCD, Battery Powered, 10-300mm Range, +/-0.04mm Accuracy, SPC, 0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 573-608 ABSOLUTE Offset Centerline Jaw Digital Caliper, LCD, Battery Powered, 10-300mm Range, +/-0.04mm Accuracy, SPC, 0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $770.00
Price: $693.68 & this item ships for FREE with Super Saver Shipping. Details
You Save: $76.32 (10%)


  • The Mitutoyo 573-608 offset centerline digital caliper uses Mitutoyo’s ABSOLUTE linear encoder technology and has an adjustable main scale jaw for measurement of center-to-center distances, edge-to-center measurements, and hole diameters. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, and Data Output, and uses the metric measuring system.
  • This caliper has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 320 g. Range is 10 - 300 mm, resolution is 0.01 mm, and accuracy is rated + or - 0.04 mm. Also included are Origin-setting, Zero-setting, and Power On/Off automatic shutoff function buttons. This caliper meets standard IP67 for protection against dust and temporary submersion in water. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (part 05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (part 938882) lasts approximately 3.5 years with normal use and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-608 caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 511-521 ABSOLUTE Digimatic LCD Bore Gauge, 1.8-4"/45-100mm Range, 0.00005"/0.001mm Graduation, +/-0.00012"/0.003mm Accuracy best seller


you want to buy Mitutoyo 511-521 ABSOLUTE Digimatic LCD Bore Gauge, 1.8-4"/45-100mm Range, 0.00005"/0.001mm Graduation, +/-0.00012"/0.003mm Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 511-521 ABSOLUTE Digimatic LCD Bore Gauge, 1.8-4"/45-100mm Range, 0.00005"/0.001mm Graduation, +/-0.00012"/0.003mm Accuracy in amazon.You can choose to buy a product and Mitutoyo 511-521 ABSOLUTE Digimatic LCD Bore Gauge, 1.8-4"/45-100mm Range, 0.00005"/0.001mm Graduation, +/-0.00012"/0.003mm Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $1,090.00
Price: $1,058.66 & this item ships for FREE with Super Saver Shipping. Details
You Save: $31.34 (3%)


  • The Mitutoyo 511-521 bore gage has a measurement range of 1.8 to 4”, a 6” probe depth, and 0.00005” resolution, with + or - 0.00012” accuracy. The gage has a liquid crystal display (LCD) for easy measurement reading, that operates on one SR44 battery (included). Estimated battery life under normal conditions is nine months. Gage housing conforms to IP53 (Ingress Protection) for dust and water protection. Mitutoyo 511-521 includes functions for origin-set, zero-set, power on/off, inch/metric conversion, Statistical Process Control (SPC) data output, Go/No Go judgment, and alarms for low battery, scale contamination, overflow error, and tolerance limit setting error. Acceptable operating temperature range is from 0 to 40 degrees C. The bore gage is compatible with extension rods for deep bore measurement (not included). Up to four 20” extension rods can be used; this unit is also compatible with 10” rods. Bore gage weight is 1.10 lbs.
  • Bore gages measure holes, or bores, in a workpiece. They can measure the interior diameter of a hole at any depth, while internal micrometers can only measure to the depth of their teeth. Bore gages are typically calibrated with a setting ring. Bore gages come in two types, one simple, and the other direct-measuring. Simple bore gages are used with a caliper to transfer the hole measurement, while the more complex gages take the measurement directly, and display the measurement through a vernier, dial, or digital display. Bore gages have a two- or three-point contact, which indicates how many points on the gage head touch the inside of the bore. Two-point contacts are better at measuring ovality, while three-point systems are used to measure lobing, or triangular form error. Pistol-grip bore gages are used for fast, single-handed operation with good repeatability from one operator to another. Bore gages, regardless of type, can be used in some special applications, such as measuring threads, spline pitch diameters, and deep bores.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 511-521 bore gage
  • SR 44 battery, 938882

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 573-642 ABSOLUTE Inside Caliper Digital Caliper, LCD, Battery Powered, 10-200mm Range, +/-0.05mm Accuracy, SPC, 0.01mm Resolution, Knife-Edge Type, Measurable Min. Hole Dia. 10mm top price


you want to buy Mitutoyo 573-642 ABSOLUTE Inside Caliper Digital Caliper, LCD, Battery Powered, 10-200mm Range, +/-0.05mm Accuracy, SPC, 0.01mm Resolution, Knife-Edge Type, Measurable Min. Hole Dia. 10mm,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-642 ABSOLUTE Inside Caliper Digital Caliper, LCD, Battery Powered, 10-200mm Range, +/-0.05mm Accuracy, SPC, 0.01mm Resolution, Knife-Edge Type, Measurable Min. Hole Dia. 10mm in amazon.You can choose to buy a product and Mitutoyo 573-642 ABSOLUTE Inside Caliper Digital Caliper, LCD, Battery Powered, 10-200mm Range, +/-0.05mm Accuracy, SPC, 0.01mm Resolution, Knife-Edge Type, Measurable Min. Hole Dia. 10mm at the Best Price Online with Secure Transaction in amazon...
List Price: $862.00
Price: $764.81 & this item ships for FREE with Super Saver Shipping. Details
You Save: $97.19 (11%)


  • The Mitutoyo 573-642 ABSOLUTE Digimatic digital caliper has knife-edge type jaws for hard-to-reach inside measurements and uses Mitutoyo’s ABSOLUTE linear encoder technology. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, and Data Output, and uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper’s LCD increases reading reliability.
  • The 573-642 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 227 g and measures outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. With its narrow tip jaws, the caliper can reach into hard to access grooves and indentations. Range is 10 to 200 mm, resolution is 0.01 mm, and accuracy is rated + or - 0.05 mm. Also included are origin-setting, zero-setting, and on/off automatic shutoff function buttons. This caliper meets standard IP67 for protection against dust and temporary submersion in water. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (938882) lasts approximately 3.5 years with normal use and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-642 digital caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-487B Absolute LCD Digimatic Indicator ID-C, Calculation Type, #4-48 UNF Thread, 0.375" Stem Dia., Flat Back, 0-2" Range, 0.00001-0.05"/ 0.0002-1mm Graduation, +/-0.00012" Accuracy best seller


you want to buy Mitutoyo 543-487B Absolute LCD Digimatic Indicator ID-C, Calculation Type, #4-48 UNF Thread, 0.375" Stem Dia., Flat Back, 0-2" Range, 0.00001-0.05"/ 0.0002-1mm Graduation, +/-0.00012" Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-487B Absolute LCD Digimatic Indicator ID-C, Calculation Type, #4-48 UNF Thread, 0.375" Stem Dia., Flat Back, 0-2" Range, 0.00001-0.05"/ 0.0002-1mm Graduation, +/-0.00012" Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-487B Absolute LCD Digimatic Indicator ID-C, Calculation Type, #4-48 UNF Thread, 0.375" Stem Dia., Flat Back, 0-2" Range, 0.00001-0.05"/ 0.0002-1mm Graduation, +/-0.00012" Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $557.00
Price: $534.55 & this item ships for FREE with Super Saver Shipping. Details
You Save: $22.45 (4%)


  • A conventional digimatic indicator simply displays a spindle displacement, but the calculation-type digimatic indicator incorporates an internal calculation function in place of spindle displacement. With fixtures, measurements such as feeler, inside diameter and radius of curvature measurement can easily be obtained without the hassle of conversion tables or equivalents. Length standard: absolute electrostatic capacitance type linear encoder. Maximum response speed unlimited. Battery: sr44 (1 pc.), 938882. Battery life approximately 12 months under normal use. Function are origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only). Alarm: low voltage, counting value composition error, over-flow error, tolerance limit setting error. Measuring force: 2.3N or less.

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading