Mitutoyo 573-191-20 ABSOLUTE Low Force Digital Caliper, LCD, Battery Powered, 0-180mm Range, +/-0.05mm Accuracy, SPC, 0.01mm Resolution best seller


you want to buy Mitutoyo 573-191-20 ABSOLUTE Low Force Digital Caliper, LCD, Battery Powered, 0-180mm Range, +/-0.05mm Accuracy, SPC, 0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-191-20 ABSOLUTE Low Force Digital Caliper, LCD, Battery Powered, 0-180mm Range, +/-0.05mm Accuracy, SPC, 0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 573-191-20 ABSOLUTE Low Force Digital Caliper, LCD, Battery Powered, 0-180mm Range, +/-0.05mm Accuracy, SPC, 0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $967.00
Price: $857.72 & this item ships for FREE with Super Saver Shipping. Details
You Save: $109.28 (11%)


  • The Mitutoyo 573-191-10 ABSOLUTE low force digital caliper uses low measuring force to measure pliable materials such as plastics and rubbers. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, and Data Output, and uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper’s LCD increases reading reliability.
  • The 573-191-10 has the ABSOLUTE electrostatic capacitance linear encoder. It weighs 253 g. Main scale length is 314 mm, jaw depth is 40 mm, and beam width is 16 mm. Range is 0 - 180 mm, resolution is 0.01 mm, and accuracy is rated at + or - 0.05 mm. Measuring force is 0.49N to 0.98N. Also included are origin-setting, zero-setting, data output, and power on/off function buttons. A Digital LCD Data Reading Hold function is available with the optional data hold unit (959143), sold separately. An alarm alerts the user to low voltage and counting value composition errors. A thumbwheel permits fast and easy measuring and a thumb screw locks the scale’s position. Response speed is unlimited. The caliper has Statistical Process Control (SPC) data output capability for manufacturing quality control. It outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (959149 or 959150, depending on cable length). The SR44 silver oxide cell battery (938882) lasts for approximately 3.5 years of normal use and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differential between two objects. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-191-10 digital caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-261 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.00005"/0.001mm Graduation, +/-0.00012" Accuracy top price


you want to buy Mitutoyo 543-261 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.00005"/0.001mm Graduation, +/-0.00012" Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-261 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.00005"/0.001mm Graduation, +/-0.00012" Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-261 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-0.5"/0-12.7mm Range, 0.00005"/0.001mm Graduation, +/-0.00012" Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $475.00
Price: $463.98 & this item ships for FREE with Super Saver Shipping. Details
You Save: $11.02 (2%)


  • Stem diameter 8mm, M2.5 x 0.45 thread. Length standard: Absolute electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Battery: SR44 (2 pieces.), 938882. Battery life: approx. 800 - 1300 Hours under normal use dust/water protection level: ip42. Origin-set/Preset, Zeroset, GO/+/-NG judgment, Max/Min/ Runout value holding, Counting direction switching, Power ON/OFF, Data output, inch/mm conversion (on inch/metric models only). Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error.

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 551-204-10 ABSOLUTE Nib and Standard Style Jaw Digital Caliper, LCD, Battery Powered, 0-500mm Range, +/-0.06mm Accuracy, SPC, 0.01mm Resolution special offers


you want to buy Mitutoyo 551-204-10 ABSOLUTE Nib and Standard Style Jaw Digital Caliper, LCD, Battery Powered, 0-500mm Range, +/-0.06mm Accuracy, SPC, 0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 551-204-10 ABSOLUTE Nib and Standard Style Jaw Digital Caliper, LCD, Battery Powered, 0-500mm Range, +/-0.06mm Accuracy, SPC, 0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 551-204-10 ABSOLUTE Nib and Standard Style Jaw Digital Caliper, LCD, Battery Powered, 0-500mm Range, +/-0.06mm Accuracy, SPC, 0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $1,150.00
Price: $1,119.43 & this item ships for FREE with Super Saver Shipping. Details
You Save: $30.57 (3%)


  • The Mitutoyo 551-204-10 ABSOLUTE Digimatic digital caliper has both standard and nib style jaws and uses Mitutoyo’s ABSOLUTE linear encoder technology. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, and Data Output, and uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper’s LCD increases reading reliability.
  • The 551-204-10 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 1,060 g and has standard upper jaws and nib style lower jaws. Range is 0 (20) to 450 mm, resolution is 0.01 mm, and accuracy is rated + or - 0.06 mm. Also included are Origin-setting, Zero-setting, and Data Output function buttons. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (938882) lasts approximately 3.5 years with normal use and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 551-204-10 caliper
  • One SR44 silver oxide cell battery
  • Wooden case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-260 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-12.7mm Range, 0.001mm Graduation, +/-0.003mm Accuracy special offers


you want to buy Mitutoyo 543-260 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-12.7mm Range, 0.001mm Graduation, +/-0.003mm Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-260 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-12.7mm Range, 0.001mm Graduation, +/-0.003mm Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-260 Absolute LCD Digimatic Indicator ID-C with Max/Min Value Holding Function, M2.5X0.45 Thread, 8mm Stem Dia., Lug Back, 0-12.7mm Range, 0.001mm Graduation, +/-0.003mm Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $461.00
Price: $421.65 & this item ships for FREE with Super Saver Shipping. Details
You Save: $39.35 (9%)


  • With max./min. value holding function model of the ID-C Series Digimatic Indicators. Length standard: Absolute electrostatic capacitance type linear encoder. Max. response speed: Unlimited. Battery: SR44 (2 pieces.), 938882. Battery life: approx. 800 - 1300 Hours under normal use dust/water protection level: ip42. Origin-set/Preset, Zeroset, GO/+/-NG judgment, Max/Min/ Runout value holding, Counting direction switching, Power ON/OFF, Data output, inch/mm conversion (on inch/metric models only). Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error.

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 573-602 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-200mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution best offers


you want to buy Mitutoyo 573-602 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-200mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-602 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-200mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 573-602 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-200mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $487.00
Price: $474.71 & this item ships for FREE with Super Saver Shipping. Details
You Save: $12.29 (3%)


  • The Mitutoyo 573-602 ABSOLUTE Digimatic offset digital caliper has a sliding main scale jaw for measurement of step sections and uses Mitutoyo’s ABSOLUTE linear encoder technology. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, and Data Output, and uses the metric measuring system.
  • The 573-602 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 198 g and has a depth bar. Range is 0 to 200 mm, resolution is 0.01 mm, and accuracy is rated + or - 0.02 mm. Also included are Origin-setting, Zero-setting, and Power On/Off automatic shutoff function buttons. This caliper meets standard IP67 for protection against dust and temporary submersion in water. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (part 05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (part 938882) lasts approximately 3.5 years with normal use and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-602 digital caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-580 Absolute LCD Digimatic Indicator ID-B, IP66, M2.5X0.45 Thread, 8mm Stem Dia., Back Plunger, 0-5mm Range, 0.01mm Graduation, +/-0.02mm Accuracy best buy


you want to buy Mitutoyo 543-580 Absolute LCD Digimatic Indicator ID-B, IP66, M2.5X0.45 Thread, 8mm Stem Dia., Back Plunger, 0-5mm Range, 0.01mm Graduation, +/-0.02mm Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-580 Absolute LCD Digimatic Indicator ID-B, IP66, M2.5X0.45 Thread, 8mm Stem Dia., Back Plunger, 0-5mm Range, 0.01mm Graduation, +/-0.02mm Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-580 Absolute LCD Digimatic Indicator ID-B, IP66, M2.5X0.45 Thread, 8mm Stem Dia., Back Plunger, 0-5mm Range, 0.01mm Graduation, +/-0.02mm Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $377.00
Price: $334.16 & this item ships for FREE with Super Saver Shipping. Details
You Save: $42.84 (11%)


  • Stem diameter 8mm M2.5 X 0.45 Thread. Length standard: absolute electrostatic capacitance type linear encoder. Max. Response speed: unlimited. Battery: sr44 (1 pc.), 938882. Battery life: approx. 7000 Hours under normal use. Dust/water protection level: ip66. Measuring force: 2.0N or less

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 573-634 ABSOLUTE Blade Jaw Type Digital Caliper, LCD, Battery Powered, 0-150mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution top deals


you want to buy Mitutoyo 573-634 ABSOLUTE Blade Jaw Type Digital Caliper, LCD, Battery Powered, 0-150mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-634 ABSOLUTE Blade Jaw Type Digital Caliper, LCD, Battery Powered, 0-150mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 573-634 ABSOLUTE Blade Jaw Type Digital Caliper, LCD, Battery Powered, 0-150mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $545.00
Price: $531.91 & this item ships for FREE with Super Saver Shipping. Details
You Save: $13.09 (2%)


  • The Mitutoyo 573-634 ABSOLUTE Digimatic blade type digital caliper uses Mitutoyo’s ABSOLUTE linear encoder technology and has thin, blade type jaws to fit into small grooves for hard-to-obtain outside (OD) measurements. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, and Data Output, and uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper’s LCD increases reading reliability.
  • The 573-634 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 168 g and has a depth bar. Outside (OD) jaw measuring faces are carbide-tipped. Range is 0 to 150 mm, resolution is 0.01 mm, and accuracy is rated + or - 0.02 mm. Also included are Origin-setting, Zero-setting, and Power On/Off automatic shutoff function buttons. This caliper meets standard IP67 for protection against dust and temporary submersion in water. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (938882) lasts approximately 3.5 years with normal use and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-634 digital caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 573-704 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-12"/0-300mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution best price


you want to buy Mitutoyo 573-704 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-12"/0-300mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-704 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-12"/0-300mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 573-704 ABSOLUTE Offset Jaw Digital Caliper, LCD, Battery Powered, 0-12"/0-300mm Range, +/-0.0015" Accuracy, SPC, 0.0005"/0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $677.00
Price: $655.20 & this item ships for FREE with Super Saver Shipping. Details
You Save: $21.80 (3%)


  • The Mitutoyo 573-704 Digimatic digital offset caliper has a sliding main scale jaw for measurement of step sections and uses Mitutoyo’s ABSOLUTE linear encoder technology. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Metric/Inch, Power On/Off, and Data Output, and uses inch and metric measuring systems.
  • The 573-704 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 350 g and has a depth bar. Range is 0 - 12"/0 - 300 mm, resolution is 0.0005"/0.01 mm, and accuracy is rated + or - 0.0015". Also included are Origin-setting, Zero-setting, Inch/Metric, and Power On/Off automatic shutoff function buttons. This caliper is Ingress Protection 67 (IP67)-certified for protection against dust and temporary submersion in water. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (part 05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (part 938882) lasts approximately 3.5 years with normal use.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-704 digital caliper
  • One SR44 silver oxide cell battery
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 552-195-10 ABSOLUTE Coolant Proof Carbon Fiber Digital Caliper, Lightweight, LCD, Battery Powered, 0-80"/0-2000mm Range, +/-0.005mm Accuracy, SPC, 0.0005"/0.01mm Resolution special discount


you want to buy Mitutoyo 552-195-10 ABSOLUTE Coolant Proof Carbon Fiber Digital Caliper, Lightweight, LCD, Battery Powered, 0-80"/0-2000mm Range, +/-0.005mm Accuracy, SPC, 0.0005"/0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 552-195-10 ABSOLUTE Coolant Proof Carbon Fiber Digital Caliper, Lightweight, LCD, Battery Powered, 0-80"/0-2000mm Range, +/-0.005mm Accuracy, SPC, 0.0005"/0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 552-195-10 ABSOLUTE Coolant Proof Carbon Fiber Digital Caliper, Lightweight, LCD, Battery Powered, 0-80"/0-2000mm Range, +/-0.005mm Accuracy, SPC, 0.0005"/0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $3,250.00
Price: $3,167.45 & this item ships for FREE with Super Saver Shipping. Details
You Save: $82.55 (3%)


  • There are no customer reviews yet.
  • Create your own review
  • Video reviews
  • Amazon now allows customers to upload product video reviews. Use a webcam or video camera to record and upload reviews to Amazon.
  • Advertisement

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-470B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-25.4mm Range, 0.001mm Graduation, +/-0.003mm Accuracy best deal


you want to buy Mitutoyo 543-470B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-25.4mm Range, 0.001mm Graduation, +/-0.003mm Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-470B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-25.4mm Range, 0.001mm Graduation, +/-0.003mm Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-470B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-25.4mm Range, 0.001mm Graduation, +/-0.003mm Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $538.00
Price: $482.83 & this item ships for FREE with Super Saver Shipping. Details
You Save: $55.17 (10%)


  • Display: LCD, length standard: absolute electrostatic capacitance type linear encoder, max. Response speed: unlimited, measuring force: refer to the list of specifications, battery: sr44 (1 pc.), 938882, battery life: approx. 5,000 Hours under normal use, dust/water protection level: ip42 or ip53 (dust-proof type) origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only).

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 536-142 ABSOLUTE Inside Vernier Caliper, 10-200mm Range, +/-0.12mm Accuracy, 0.01mm Graduation, Knife-Edge Type, Measurable Min. Hole Dia. 10mm top price


you want to buy Mitutoyo 536-142 ABSOLUTE Inside Vernier Caliper, 10-200mm Range, +/-0.12mm Accuracy, 0.01mm Graduation, Knife-Edge Type, Measurable Min. Hole Dia. 10mm,yes ..! you comes at the right place. you can get special discount for Mitutoyo 536-142 ABSOLUTE Inside Vernier Caliper, 10-200mm Range, +/-0.12mm Accuracy, 0.01mm Graduation, Knife-Edge Type, Measurable Min. Hole Dia. 10mm in amazon.You can choose to buy a product and Mitutoyo 536-142 ABSOLUTE Inside Vernier Caliper, 10-200mm Range, +/-0.12mm Accuracy, 0.01mm Graduation, Knife-Edge Type, Measurable Min. Hole Dia. 10mm at the Best Price Online with Secure Transaction in amazon...
List Price: $735.00
Price: $580.59 & this item ships for FREE with Super Saver Shipping. Details
You Save: $154.41 (21%)


  • The Mitutoyo 536-142 inside vernier caliper takes precision inside measurements from 10 to 200 mm, for applications requiring high levels of accuracy, especially in scientific research and in industries where parts must fit exactly. This caliper has knife-edge type jaws for taking hard-to-reach inside measurements, such as hole diameters.
  • The vernier caliper has a fixed (main) scale and a movable (vernier) scale. The vernier scale moves over the main scale rule to give a fractional measurement which is added to the measurement of the main scale to achieve a more accurate result. The main scale may be marked in inches, millimeters, or both. The vernier scale may be marked in inches or millimeters. A thumbwheel permits fast measuring, and a rotating screw controls the caliper’s movement.
  • The 536-142 measures in metric units. The vernier reading of the lower scale is 0.05 mm. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper weighs 210g and is made of hardened stainless steel construction with a satin chrome finish. With its knife-like jaws this caliper takes inside measurements. It has a main slide length of 288 mm, jaw depth of 70 mm, a blade height of 8 mm, a blade thickness of 0.3 mm, and a beam width of 16 mm. Range is 10 – 200 mm, resolution is 0.05 mm, and accuracy is rated at + or - 0.12 mm, which meets Federal Accuracy Specifications GGG-C-111B.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 536-142 digital caliper
  • Fitted, plastic case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 547-257S ABSOLUTE Digimatic LCD Depth Gauge, Indicator Type, 0-8"/0-200mm Range, 0.00005"/0.001mm Graduation, +/-0.0003" Accuracy, 2.5" x 0.63" Base best buy


you want to buy Mitutoyo 547-257S ABSOLUTE Digimatic LCD Depth Gauge, Indicator Type, 0-8"/0-200mm Range, 0.00005"/0.001mm Graduation, +/-0.0003" Accuracy, 2.5" x 0.63" Base,yes ..! you comes at the right place. you can get special discount for Mitutoyo 547-257S ABSOLUTE Digimatic LCD Depth Gauge, Indicator Type, 0-8"/0-200mm Range, 0.00005"/0.001mm Graduation, +/-0.0003" Accuracy, 2.5" x 0.63" Base in amazon.You can choose to buy a product and Mitutoyo 547-257S ABSOLUTE Digimatic LCD Depth Gauge, Indicator Type, 0-8"/0-200mm Range, 0.00005"/0.001mm Graduation, +/-0.0003" Accuracy, 2.5" x 0.63" Base at the Best Price Online with Secure Transaction in amazon...
List Price: $561.00
Price: $516.16 & this item ships for FREE with Super Saver Shipping. Details
You Save: $44.84 (8%)


  • Mitutoyo IDC Digimatic Depth Gage, Resolution: .00005"/0.001mm, Range: 0 -8", Base: 2.5"

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 573-119-10 ABSOLUTE Back-Jaw Centerline Digital Caliper, Edge-to-Center Distance Type, LCD, Battery Powered, 10-300mm Range, +/-0.15mm Accuracy, SPC, 0.01mm Resolution top deals


you want to buy Mitutoyo 573-119-10 ABSOLUTE Back-Jaw Centerline Digital Caliper, Edge-to-Center Distance Type, LCD, Battery Powered, 10-300mm Range, +/-0.15mm Accuracy, SPC, 0.01mm Resolution,yes ..! you comes at the right place. you can get special discount for Mitutoyo 573-119-10 ABSOLUTE Back-Jaw Centerline Digital Caliper, Edge-to-Center Distance Type, LCD, Battery Powered, 10-300mm Range, +/-0.15mm Accuracy, SPC, 0.01mm Resolution in amazon.You can choose to buy a product and Mitutoyo 573-119-10 ABSOLUTE Back-Jaw Centerline Digital Caliper, Edge-to-Center Distance Type, LCD, Battery Powered, 10-300mm Range, +/-0.15mm Accuracy, SPC, 0.01mm Resolution at the Best Price Online with Secure Transaction in amazon...
List Price: $1,130.00
Price: $1,095.78 & this item ships for FREE with Super Saver Shipping. Details
You Save: $34.22 (3%)


  • The Mitutoyo 573-119-10 ABSOLUTE back-jaw centerline digital caliper uses Mitutoyo’s ABSOLUTE linear encoder technology and has specialized jaws for measuring edge to center distances on the same and offset planes. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, and Data Output, and uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper’s LCD increases reading reliability.
  • The 573-119-10 has the ABSOLUTE electrostatic capacitance type linear encoder. It weighs 581 g. Range is 10 to 300 mm, resolution is 0.01 mm, and accuracy is rated + or - 0.15 mm. Also included are Origin-setting, Zero-setting, Data Output, and Power On/Off function buttons. An alarm alerts the user to low voltage and counting value composition errors. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (959149 or 959150, depending on cable length). Optional Data Hold unit (959143) is available. The SR44 silver oxide cell battery (938882) lasts approximately 3.5 years with normal use and is recommended to maintain constant voltage levels.
  • Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.
  • What’s in the Box?
  • Mitutoyo 573-119-10 caliper
  • One SR44 silver oxide cell battery
  • Fitted, wooden case

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-486B Absolute LCD Digimatic Indicator ID-C, Calculation Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-2" Range, 0.00001-0.05"/ 0.0002-1mm Graduation, +/-0.00012" Accuracy best price


you want to buy Mitutoyo 543-486B Absolute LCD Digimatic Indicator ID-C, Calculation Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-2" Range, 0.00001-0.05"/ 0.0002-1mm Graduation, +/-0.00012" Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-486B Absolute LCD Digimatic Indicator ID-C, Calculation Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-2" Range, 0.00001-0.05"/ 0.0002-1mm Graduation, +/-0.00012" Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-486B Absolute LCD Digimatic Indicator ID-C, Calculation Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-2" Range, 0.00001-0.05"/ 0.0002-1mm Graduation, +/-0.00012" Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $557.00
Price: $487.48 & this item ships for FREE with Super Saver Shipping. Details
You Save: $69.52 (12%)


  • A conventional digimatic indicator simply displays a spindle displacement, but the calculation-type digimatic indicator incorporates an internal calculation function in place of spindle displacement. With fixtures, measurements such as feeler, inside diameter and radius of curvature measurement can easily be obtained without the hassle of conversion tables or equivalents. Length standard: absolute electrostatic capacitance type linear encoder. Maximum response speed unlimited. Battery: sr44 (1 pc.), 938882. Battery life approximately 12 months under normal use. Function are origin-set/preset, zeroset, go/+/-ng judgment, counting direction switching, power on/off, data output, inch/mm conversion (on inch/metric models only). Alarm: low voltage, counting value composition error, over-flow error, tolerance limit setting error. Measuring force: 2.3N or less.

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-391B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-0.5"/0-12.7mm Range, 0.00005"/0.001mm Graduation, +/-0.0001" Accuracy top price


you want to buy Mitutoyo 543-391B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-0.5"/0-12.7mm Range, 0.00005"/0.001mm Graduation, +/-0.0001" Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-391B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-0.5"/0-12.7mm Range, 0.00005"/0.001mm Graduation, +/-0.0001" Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-391B Absolute LCD Digimatic Indicator ID-C, Standard Type, M2.5X0.45 Thread, 8mm Stem Dia., Flat Back, 0-0.5"/0-12.7mm Range, 0.00005"/0.001mm Graduation, +/-0.0001" Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $402.00
Price: $398.14 & this item ships for FREE with Super Saver Shipping. Details
You Save: $3.86 (1%)


  • Mitutoyo IDC Digimatic Indicator, Resolution: .00005"/.0001"/.0005"/0.001mm/0.01mm Range: .500", Stem diameter: 8mm, Back: Flat back, Output: Yes, Face rotation: 330°, Functions: Origin-set/Preset, Zeroset, GO/±NG judgment, Counting direction switching,

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading

Mitutoyo 543-564A Absolute LCD Digimatic Indicator ID-H, #4-48 UNF Thread, 0.375" Stem Dia., 0-2.4"/0-60.9mm Range, +/-0.0025mm Accuracy top price


you want to buy Mitutoyo 543-564A Absolute LCD Digimatic Indicator ID-H, #4-48 UNF Thread, 0.375" Stem Dia., 0-2.4"/0-60.9mm Range, +/-0.0025mm Accuracy,yes ..! you comes at the right place. you can get special discount for Mitutoyo 543-564A Absolute LCD Digimatic Indicator ID-H, #4-48 UNF Thread, 0.375" Stem Dia., 0-2.4"/0-60.9mm Range, +/-0.0025mm Accuracy in amazon.You can choose to buy a product and Mitutoyo 543-564A Absolute LCD Digimatic Indicator ID-H, #4-48 UNF Thread, 0.375" Stem Dia., 0-2.4"/0-60.9mm Range, +/-0.0025mm Accuracy at the Best Price Online with Secure Transaction in amazon...
List Price: $992.00
Price: $878.43 & this item ships for FREE with Super Saver Shipping. Details
You Save: $113.57 (11%)


  • Mitutoyo 543-564A LCD Absolute Digimatic ID-H560E Indicator has five user-selectable resolutions of 0.00002, 0.00005, or 0.0001”, and 0.0005 or 0.001 mm, an accuracy of + or - 0.0001” (0.0025 mm), and a total measurement range of 0” - 2.4” (0 - 60.9 mm), and can be set to zero at any spindle position for measuring in either or both directions (plus or minus). The LCD display has a sealed housing that meets Ingress Protection Rating 30 (IP30) standards for dust and water protection, an 8-mm diameter stem, a steel ball contact point, and a flat back. The indicator displays maximum and minimum read hold, changes color from green to red when user-defined tolerances are exceeded, and has total indicator reading (TIR) capability that displays the absolute difference between the highest and lowest readings. A backup memory function retains user-defined setup conditions when power is interrupted, and an alarm low voltage and overflow, tolerance limit setting, and counting value composition errors. The indicator has remote control functionality, RS-232C data input and output, and SPC data output features that allow for data analysis, and a choice of two power sources (AC or 9V battery).
  • Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.
  • Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

read more Details





Mitutoyo 500-506-10 ABSOLUTE Digital Caliper, LCD, Battery Powered, 0-24"/0-600mm

Continue Reading